Compare electric forklifts: reading electric and lithium data
Practical guide to vehicle selection
The current public MIMA inventory is listed with electric drive. The “Electric” filter narrows this selection. Whether a specific offer states a lithium-ion battery, and which voltage or capacity it gives, must still be checked on that offer page.
Build a structured electric-forklift shortlist
- Use the electric filter for initial narrowing
- Check technical battery data on the specific offer
- Assess load capacity together with load data
- Compare lift height and overall height
- Match the mast to racking and clearances
- Document the duty profile and charging infrastructure
What the electric filter shows – and what it does not
Open the filtered electric-forklift inventory. The filter describes the general drive type. It does not automatically confirm a battery technology, voltage or capacity for every vehicle.
| Review level | In the vehicle list | Check on the offer page |
|---|---|---|
| Drive | Electric as filter criterion | Entry for the specific vehicle |
| Battery | Do not infer from the filter | Lithium entry, voltage and capacity only when stated |
| Suitability | Initial shortlist | Match against load, heights, mast and operation |
Read technical data in context
A battery entry alone does not establish operational suitability. Compare stated load capacity with load weight and load centre, lift height with the working level, and overall height with doors and clearances. Also review mast type, travel routes, floor conditions, shift pattern and existing charging points. For a broader comparison, open the complete MIMA vehicle inventory; for a requirements-led shortlist, use the MIMA forklift configurator.
Checklist before comparing
Prepare reliable operational data before assessing individual offers:
- maximum load weight, dimensions and load centre
- required lift height and highest transfer level
- lowest clear height along the travel route
- required mast type and possible attachments
- working periods, breaks and operating intensity
- available charging locations, connections and operational charging windows
Narrow down suitable electric MIMA vehicles
Start with the electric filter, then compare only the details stated for the specific offer with your documented duty profile.
Frequently asked questions about electric and lithium data
What does the electric filter show?
It narrows the current vehicle list to offers recorded with electric drive.
Does electric automatically mean lithium?
No. Electric describes the drive type. A lithium-ion battery must be stated explicitly on the specific offer.
Where are voltage and capacity shown?
These values are reliable only when the individual offer page states them for that specific vehicle.
Which data should I compare first?
Start with load capacity, load data, lift height, overall height and mast, then assess duty profile and charging infrastructure.
Why must overall height be checked?
It must fit doors, gates and other height restrictions along the intended travel route.
What role does the mast play?
The mast type affects suitability for working heights, racking and building constraints and must be checked for the application.
Why is the duty profile important?
Working duration, intensity, routes and breaks determine which vehicle and charging setup should be assessed.
What belongs in a charging-infrastructure review?
Record charging locations, available connections, operational charging windows and internal safety rules without assuming performance values.
Disclaimer / legal notice:
The images shown on this website may have been generated using artificial intelligence and are provided solely for illustrative purposes. They are not original product photographs from the respective manufacturers. All trademarks, logos and model designations are the property of their respective owners and are used only for clear identification.