MIMA MQZ-25: 2.5 t Multidirectional Forklift for Long Loads and Variable Lift Heights
Long profiles, pipes, timber or sheet material cannot be planned like a standard pallet. The electric MIMA MQZ-25 belongs to multidirectional warehouse equipment and combines a capacity of 2.5 tonnes (2,500 kg) with a travel concept for long loads and constrained warehouse areas.
At the time of publication, the persistent MQZ-25 model listing contains 20 new electric vehicles from model year 2026. The listed triplex configurations range from 3.6 to 10.5 metres (3,600 to 10,500 mm) in lift height. This range describes the stock currently published.
MIMA MQZ-25 at a glance
- Electric, seated multidirectional forklift
- Confirmed capacity in the current model listing: 2,500 kg
- Currently published lift heights: 3,600 to 10,500 mm
- Currently listed overall heights: 2,070 to 4,570 mm
- Triplex mast on the published vehicles
- 20 new vehicles from model year 2026 at the time of publication
- Series focus: long materials and narrow aisles
- Selection based on load, travel space, lift height and clearances
Technical data from the current MQZ-25 model listing
The figures in this table refer to the publicly listed model stock. The range of lift and overall heights shows why the correct configuration must be selected against the actual warehouse.
| Model | MIMA MQZ-25 |
|---|---|
| Equipment type | Electric multidirectional forklift |
| Capacity | 2,500 kg (2.5 t) |
| Currently listed lift heights | 3,600-10,500 mm (3.6-10.5 m) |
| Currently listed overall heights | 2,070-4,570 mm |
| Mast | Triplex |
| Drive | Electric |
| Current publication status | 20 new vehicles, model year 2026 |
Why long loads require a multidirectional travel concept
The official MIMA description positions the MQZ-25 as a seated multidirectional reach truck. Straight, sideways and diagonal travel as well as tight direction changes belong to the series concept. The vehicle direction can therefore be adapted to long materials.
The technical capability alone does not confirm suitability. Load length, load centre, fork support, aisle width and turning areas determine whether the concept can be used in a specific operation.
Do not select lift height and overall height separately
The current model listing covers clearly different lift heights. At the same time, overall heights range from 2,070 to 4,570 mm. A taller mast may be required for racking levels but must nevertheless pass through doors and building areas.
Record the top racking level, load dimensions, operating reserve and lowest clearance before selection. The highest published configuration is not automatically the right solution.
Practical value for profiles, pipes and sheet material
The MQZ-25 may be relevant for warehouse and production businesses that regularly move long goods between storage, processing and dispatch. A potential benefit exists where sideways travel fits the layout and long loads do not need to be realigned for every route section.
Visibility, meeting zones, floor quality and transport frequency also matter in daily work. These process facts should be available before a technical enquiry.
Measure process value instead of making general claims
Commercial value does not come from the vehicle name alone. Travel distances, manoeuvring points, daily movement count and occupied warehouse space are relevant. Comparing the current and planned processes shows whether multidirectional technology is organisationally useful.
Energy supply, operator organisation, maintenance access and seasonal load profiles also belong in the assessment. Fixed savings or performance promises should not be derived without this information.
Selection matrix for an MQZ-25 enquiry
| Criterion | Why it matters |
|---|---|
| Load weight, length and centre | Defines capacity and load-support requirements |
| Racking and working height | Defines the required lift height |
| Lowest clearance | Limits the permissible overall height |
| Aisle width and turning areas | Checks which travel movements can be used |
| Floor and transitions | Classifies the actual operating environment |
| Daily transport volume | Basis for process and energy planning |
Align procurement with the actual requirement
The current model listing offers a wide selection of lift heights, but published stock can change. Compare the required configuration with the load data and building profile before an enquiry. Price and delivery window belong in a specific quotation.
The persistent MQZ-25 model page remains the stable entry point for current vehicles. A configuration can be prepared where no published version matches the operating profile.
Assess the MIMA MQZ-25 for the long-load process
Compare current MQZ-25 configurations by lift height and overall height. Prepare load, aisle and clearance data for configuration.
FAQ about the MIMA MQZ-25
What capacity do the currently listed MIMA MQZ-25 forklifts have?
The public model listing shows the MIMA MQZ-25 with a capacity of 2,500 kg or 2.5 tonnes. The nominal value must be assessed together with load centre and lift height.
Which MQZ-25 lift heights are currently published?
At the time of publication, the model listing ranges from 3,600 to 10,500 mm, or 3.6 to 10.5 metres. This range describes the stock currently published.
Which materials is the MQZ series intended to handle?
MIMA identifies long materials and stacking tasks in narrow aisles as core applications of the MQZ series. Suitability for a specific load depends on weight, length, load centre and load support.
Which travel movements belong to the MQZ concept?
The official description includes straight, sideways and diagonal travel as well as right-angle direction changes and rotation in confined areas. Whether these movements can be used depends on the actual layout.
Are the currently listed MQZ-25 forklifts electric?
Yes. The current vehicles are published as electric forklifts. Runtime, charging-window or energy-consumption claims require additional equipment and process data.
Which mast type is currently shown?
The currently published MQZ-25 vehicles are listed with triplex masts. Lift height and overall height must be checked together against doors and building clearances.
Why does the article avoid an individual vehicle link?
The persistent MQZ-25 model listing remains accessible after inventory changes. This prevents an indexed article from automatically leading to an unavailable individual offer.
Which data helps to select the right configuration?
Relevant information includes load weight, load length, load centre, required lift height, aisle width, turning areas, clearances, floor conditions and daily operating duration.